Contact Information
02921 157162
LEDfiretorches.co.uk
Suite 1, Storage Giant,
376 Newport Road,
Cardiff.
CF23 9AE
You have no items to compare.
| Brand | 4Sevens |
| Model | PI-Blue |
| Batteries | AAA x 1 |
| Additional Battery Type | Rechargeable AAA NiMH x 1 |
| Lamp Type | CREE XP-G R5 LED |
| Output/Runtime | High 70 lumens (0.8 hours), Med 8.5 lumens (6 hours), Low 1.8 lumens (23 hours), Strobe (1.6 hours), S.O.S (2.4 hours), Beacon High / Low (8 / 40 hours) |
| Strobe/SOS | Strobe, S.O.S and beacon mode |
| Reflector | Orange peel |
| Lens Type | Optical-grade glass lens with anti-reflective coating on both sides |
| Switch Type | Twist head |
| Construction | Hard-anodized Aircraft-grade Aluminum |
| Finish | 4Sevens Blue |
| Pocket Clip | Yes |
| Tail Stand | Yes |
| Waterproofing | Waterproof to IPX-8 standard |
| Dimensions | Length : 2.95 in, Diameter : 0.55 in |
| Weight | 0.5 oz |
| Package & Contents | Retail boxed, 4Sevens Preon I - 4Sevens Blue, spare o-rings, keychain ring attachment. Includes AAA battery. |
| Further Info | Operation Operating your Preon 1 is simple. Make sure its batteries are inserted with the positive side (+) toward the head. Ensure the tailcap is tightened. To turn the Preon on, tighten the bezel (the ‘head’ of the light) fully down. The Preon will turn on when the bezel is fully tightened, and turn off when the bezel is loosened. Selecting Regular Outputs To select a different level of constant output, turn the Preon off and then on again within 1 second. This will select the next level of constant output in the following sequence: Low -> Medium -> High If the Preon is turned off for 2 seconds or longer, it will revert back to Low. Selecting Special Outputs The Preon has 4 special output modes: Strobe, S.O.S., Beacon (Hi), and Beacon (Lo). To access these modes, quickly switch through two full 'cycles' of the regular outputs, starting with Low. These two full cycles must be completed within 3 seconds: Low -> Medium -> High -> Low -> Medium -> High -> Special Outputs You can continue to cycle through the special outputs in the following sequence: Strobe -> S.O.S. -> Beacon (high) -> Beacon (low) After Beacon (Lo) mode, the output reverts back to Regular Low. Both Beacon modes will first flash 5 times and then once every 10 seconds. |