Contact Information
02921 157162
LEDfiretorches.co.uk
Suite 1, Storage Giant,
376 Newport Road,
Cardiff.
CF23 9AE
You have no items to compare.
| Brand | 4Sevens |
| Model | 4Sevens Quark X AA² Tactical |
| Batteries | AA x 2 |
| Additional Battery Type | Rechargeable AA NiMH x 2 |
| Lamp Type | CREE XM-L LED |
| Output/Runtime | Max 280 lumens (0.8 hours), High 115 lumens (2.5 hours), Medium 24 lumens (20 hours), Low 2.7 lumens (3 days), Moonlight 0.3 lumens (15 days), Strobe (1.6 hours), Beacon (8 hours), SOS (3 hours) |
| Strobe/SOS | Strobe, S.O.S and beacon mode |
| Reflector | Orange peel |
| Lens Type | Optical-grade glass lens with anti-reflective coating on both sides |
| Switch Type | Reverse clicky |
| Construction | Hard-anodized Aircraft-grade Aluminum |
| Finish | Type III HA |
| Pocket Clip | Yes |
| Tail Stand | Yes |
| Waterproofing | Waterproof to IPX-8 standard |
| Dimensions | Length : 5.8 in, Diameter : 0.86 in |
| Weight | 2.2 oz |
| Package & Contents | Retail boxed, 4Sevens Quark X AA² Tactical, holster, hand grip, spare o-rings, lanyard, instructions plus warranty. Includes AA batteries x 2 |
| Further Info | Operating your Quark Tactical is simple. Insert the batteries with the positive side (+) towards the head. Make sure the head and tailcap are tightened, then depress the tailcap button fully so that it "clicks" and the light turns on. You can also press the tailcap lightly (you don't have to "click" it on) to activate the light momentarily. This is known as the momentary-on feature. The Quark Tactical can memorize any two modes of output, from its eight total modes, to be instantly available. These two memorized modes are accessed by either tightening or loosening the head (for example, tight can be Max, and loose can be Low). Programming Modes: To have your Quark Tactical memorize a different mode, turn it on and loosen the head by a half-turn. Then, tighten the head at least four times rapidly (twisting it tight, then loose, then tight, etc., four times). After the fourth time, leave the head tight or loose depending which position you want to program. Moonlight » Low » Medium » High » Max » SOS » Strobe » Beacon Once you find your desired mode, leave that mode on for ten seconds and the light will flash again, confirming that the mode has been memorized. To cancel programming before it flashes, turn the light off for three seconds. |